Baldor MIN1853 manual COPY, to PAD Submenu

COPY, TO PAD Submenu Continued

To copy a program from a PC to the keypad, connect the keypad to the RS232 port of the PC (COM1 or COM2). Start the Application Developer software and from the Communications menu, click on “Send All”. The keypad will display the message “Receiving From PC” and a few more messages will quickly appear, then disappear from the screen. When the keypad display is blank, the transfer is complete.

COPY, FROM Submenu Copy a program from the keypad to the LinStep+ or to a PC.

Action	Display	Comments
Press F3 (FROM). Four		Copies a program from the keypad to
	Receiving From EEPROM
messages are displayed		LinStep+. When the “Saving To
sequentially.		Memory” message disappears, the
		transfer is complete.
	Sending To Drive
	Waiting For Processing
	Saving To Memory

To copy a program from the keypad to a PC, connect the keypad to the RS232 port of the PC (COM1 or COM2). Start the Application Developer software and from the Communications menu, click on “Retrieve All” and choose “From Keypad”. The keypad will display the message “Sending to PC” and a few more messages will quickly appear, then disappear from the screen. When the keypad display is blank, the transfer is complete.

DEL Menu The DEL (Delete) key allows you to delete any motion program.

Action		Display	Comments
Press the DEL key.			Enter the program number. Or, if
	↑	DELETE PROGRAM↓
			you wish, you can scroll the list of
	>6
			program names.
			Press ENTER when finished.
			Press F1 to delete program or F3 to not
	DELETE PROGRAM #6
			delete the program.
	YES	NO

DEL is also used to delete text or numeric characters in the editor. Use the cursor control keys to move over the character you wish to delete, then press DEL.

MN1853 Keypad Operation 4-11