Baldor MIN1853 LXOpto 44 and 88 , Figure 3-21 OPTO Racks

Section 1
General Information
3-14 Receiving & Installation MN1853
LXOpto 44 and 88 Break out box and accessories.
Two break out boxes are available; LXOpto44 accepts up to 8 conditioning
modules and LXOpto88 accepts up to 16 conditioning modules. Figure 3-21
shows the layout and dimensions of each. Each allows the use of discrete inputs
and outputs and provide the ability to perform signal conditioning.
Figure 3-21 OPTO Racks
Input 1 Module Input 2 Module Input 3 Module Input 4 Module Output 1 Module Output 2 Module Output 3 Module Output 4 Module
5.525
(133.40)
3.60
(91.44)
I1+ I1– I2+ I2– I3+ I3– I4+ I4–
O1+ O1– O2+ O2– O3+ O3– O4+ O4–
IN OUT
J1 J2 J3
J4 J5
IN1 IN2 COM IN3 IN4 COM IN5 IN6 COM IN7 IN8 COM O1 O2 COM O3 O4 COM O5 O6 COM O7 O8 COM
Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2
Notes
1. Do Not Use.
2. Always usable (no corresponding
module).
3. Do not use IN1–4 or O1–4 if a
corresponding LXOPTO module is being
used. Using the same J2 or J3 signal
with a module in place may result in
equipment damage.
4. J1 connector connects to the DB25
“Discrete I/O” connector on LinStep+.
Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2
Input 1 Module Input 2 Module Input 3 Module Input 4 Module Input 5 Module Input 6 Module Input 7 Module Input 8 Module
10.10
(256.54)
I1+ I1– I2+ I2– I3+ I3– I4+ I4– I5+ I5– I6+ I6– I7+ I7– I8+ I8–
IN OUT
J1 J2 J3
J4 J5
IN1 IN2 COM IN3 IN4 COM IN5 IN6 COM IN7 IN8 COM O1 O2 COM O3 O4 COM O5 O6 COM O7 O8 COM
Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2
Output 1 Module Output 2 Module Output 3 Module Output 4 Module Output 5 Module Output 6 Module Output 7 Module Output 8 Module
O5+ O5– O6+ O6– O7+ O7– O8+ O8–
J6 J7
3.60
(91.44)
LXOpto 44
LXOpto 88
O1+ O1– O2+ O2– O3+ O3– O4+ O4–