Cino MP3200 manual Character height selection Bit Hex Decimal Height

Command Descriptions

VERSAJET MP3200

Programming Reference

Character height selection

Bit 2	Bit 1	Bit 0	Hex	Decimal	Height
Off	Off	Off	00	0	1(normal)
Off	Off	On	01	1	2(double-height)
Off	On	Off	02	2	3
Off	On	On	03	3	4
On	Off	Off	04	4	5
On	Off	On	05	5	6
On	On	Off	06	6	7
On	On	On	07	7	8

[Notes]

‹The character size set by this command is effective for alphanumeric, Kana, multilingual and user-defined characters.

‹When the characters are enlarged with different heights on one line, all the characters on the line are aligned at the baseline.

‹When the characters are enlarged widthwise, the characters are enlarged to the right, base on the left side of the character.

‹ESC ! can also turn double-width and double-height modes on or off.

‹In standard mode, the character is enlarged in the paper feed direction when double-height mode is selected, and it is enlarged perpendicular to the paper feed direction when double-width mode is selected. However, when character orientation changes in 90° clockwise rotation mode, the relationship between double-height and double-width is reversed.

53 Preliminary Rev. 02