VERSAJET MP3200
Programming Reference
Command Descriptions
[Notes]
In standard mode, this command is effective only when there is no data in the print buffer.
This command has no effect in the print modes (emphasized,
If the printing area width set by GS L and GS W is less than the minimum width, the printing area is extended to the minimum width only on the line in question. The minimum width means 1 dot in normal (n=0, 48) and
Data outside the printing area is read in and discarded on a
The position at which subsequent characters are to be printed for raster bit image is specified by HT(Horizontal Tab), ESC $(Set absolute print position), ESC \(Set relative print position), and GS L(Set left margin). If the position at which subsequent characters are to be printed is not a multiple of 8, print speed may decline.
The ESC a(Select justification) setting is also effective on raster bit images.
When this command is received during macro definition, the printer ends macro definition, and begins performing this command. The definition of this command should be cleared.
81 | Preliminary Rev. 02 |
