VERSAJET MP3200

Programming Reference

Command Descriptions

‹ Data is written to the non-volatile memory by this command. Note the following when using this command.

„ The printer is BUSY when writing the data to the non-volatile memory. In this case, be sure not to transmit data from the host because the printer does not receive data.

„ Excessive use of this function may destroy the non-volatile memory. As a guideline, do not use any combination of the following commands more than 10 times per day for writing data to the nonvolatile memory: FS q, GS ( A (part of functions), GS ( C (part of functions), GS ( E (part of functions), GS ( L / GS 8 L (part of functions), GS ( M (part of functions), GS g 0, and FS g 1.

176

Preliminary Rev. 02

Page 182
Image 182
Cino MP3200 manual 176