Cino MP3200 manual ESC * m nL nH d1dk, 1B 2A m nL nH d1 dk, 27 92 m nL nH d1 dk

Command Descriptions

		ESC *
	VERSAJET MP3200
Programming Reference		[Name]		Select bit-image mode
		[Format]		ASCII	ESC * m nL nH d1dk
				Hex	1B 2A m nL nH d1 dk
				Decimal	27 92 m nL nH d1 dk
		[Range]		m = 0, 1, 32, 33
				0≦nL≦255
				0≦nH≦3
				0≦d≦255
				k = nL + nH x 256 [in case of m = 0, 1]
				k = nL + nH x 256 x 3 [in case of m = 32, 33]
		[Description]	Selects a bit-image mode using m for the number of dots specified by (nL + nH x256) as
			follows:
				m	Mode	Number of bits	dot density in	Amount of data(k)
						for vertical	horizontal
						data
				0	8-dot single-density	8	single-density	nL + nH x 256
				1	8-dot double-density	8	double-density	nL + nH x 256
				32	24-dot single-density	24	single-density	nL + nH x 256 x 3
				33	24-dot double-density	24	double-density	nL + nH x 256 x 3

* k indicates the bit image data

[Notes]

‹Data (d) specifies a bit printed to 1 and not printed to 0.

‹If the bit image data exceeds the number of dots to be printed on a line, the excess data is ignored.

74 Preliminary Rev. 02