Cisco Systems ASR 9001-S manual Block

Chapter 1 Preparing for Installation

Site Requirement Guidelines

Figure 1-20shows the type of terminal block required for DC-input cable connections.

Figure 1-20 DC Power Cable Terminal Block

	331934
	Figure 1-21shows DC power source cable connections for single DC power module.
Caution	To avoid shock hazard, be sure to apply shrink wrap tubing around the wire entry area of the terminal
	block.

Warning Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement 1086

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

1-18