Cisco Systems ASR 9001-S manual Attaching the Rear Adapter Plates

Chapter 2 Unpacking and Installing the Chassis

Installing the Optional Air Plenum Kit

Figure 2-15 Attaching the Rear Adapter Plates

361534

Step 8 Place the Cisco ASR 9001 Router on a flat and stable surface. Attach the rear grounding bracket (Figure 2-9).

Step 9 Install the Cisco ASR 9001 Router in the plenum assembly in the rack (see Installing the Chassis in a Two-Post Rack, page 2-6or Installing the Chassis in a Four-Post Rack, page 2-8).

Step 10 After the chassis is installed in the rack, attach the cable guide to the front left post of the rack at the same location as shown in Figure 2-10. Secure the cable guide to the rack post with one customer-supplied rack-mounting screw.

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

2-21