3-5
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Chapter3 Installing Modules and Cables in the Chassis
Modular Port Adapters
Figure 3-4 shows an example of the 2-Port 10 Gigabit Ethernet modular port adapter.
Figure3-4 2-Port 10 Gigabit Ethernet Modular Port Adapter
Table 3 -2 describes the 2-Port 10 Gigabit Ethernet modular port adapter LEDs.
2-Port 40 Gigabit Ethernet Modular Port Adapter
The 2-Port 40 Gigabit Ethernet modular port adapter provides two cages for QSFP+ Ethernet optical
interface modules that operate at a rate of 40 Gbps.
Each QSFP cage on the 2-Port 40 Gigabit Ethernet modular port adapter has an adjacent Link LED
visible on the front panel. The Link LED indicates the status of the associated QSFP port, as described
in Table 4 -4.
330782
STATUS
A9K-MPA-2X10GE
A9K-MPA-2X10GE
0
Table3-3 2-Port 10 Gigabit Ethernet Modular Port Adapter LEDs
LED Label Color State Meaning
A/L Off Off Port is not enabled.
Green On Port is enabled and the link is up. The MPA A/L LED will
blink green when there is traffic activity.
Amber On Port is enabled and the link is down.
STATUS Off Off Modular port adapter power is off.
Green On Modular port adapter is ready and operational.
Amber On Modular port adapter power is on and good, and the
modular port adapter is being configured.