Cisco Systems ASR 9001-S manual AC Input Voltage Range, DC Input Voltage Range

Appendix A Technical Specifications

AC Input Voltage Range

Table A-4	DC Electrical Specifications
Description		Value
Source DC service		Sufficient to supply the rated input current. Local codes apply.
requirement1
Redundancy		Power redundancy requirements vary, based on system configuration
		(number and type of line cards, etc). AC powered systems are 2N
		protected and DC powered systems are N+1 protected.

1.For each DC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information.

AC Input Voltage Range

Table A-5	AC Input Voltage Range (Single-Phase Power Source)
			Minimum		Maximum
Range		Minimum	Nominal	Nominal	Nominal	Maximum
Input Voltage		90 VAC	100 VAC	220 VAC	240 VAC	264 VAC
Line Frequency		47 Hz	50 Hz	50/60 Hz	60 Hz	63 Hz

DC Input Voltage Range

Table A-6	DC Input Voltage Range
Range		Minimum	Nominal	Maximum
Input Voltage		–40 VDC	–48 VDC	–72 VDC

Power System DC Output Levels

Table A-7 DC Output Levels for AC or DC Power System

Parameter	Value
Voltage
Maximum	12.6 VDC
Nominal	12 VDC
Minimum	11.4 VDC
Power
Minimum (one power module)	750 W
Maximum (two 750 W power modules)	1500 W

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

A-4