Chapter 1 Preparing for Installation
Cisco ASR 9001 Router Port Connection Guidelines
Table | BITS/J.211 Connector Pinout | |
|
|
|
Pin | Signal | Note |
|
|
|
1 | DTI_P/BITS_RX_P | |
|
|
|
2 | DTI_P/BITS_RX_N | |
|
|
|
3 | — | — |
|
|
|
4 | BITS_TX_P* | T1/E1/6.321M Output |
|
|
|
5 | BITS_TX_N* | T1/E1/6.321M Output |
|
|
|
6 | — | — |
|
|
|
7 | — | — |
|
|
|
8 | — | — |
|
|
|
RP External USB Port
The Cisco ASR 9001 Router RP card has an external USB Type A slot accessible on the front panel. The front panel USB slot accepts widely available USB thumb drives. The only restriction on devices you can plug into the front panel external USB slot is that they need to be USB 2.0 devices. These devices can be formatted with FAT16, FAT32 or QNX4 file systems.
The mount point /disk1: is reserved for the front panel USB device.
Note Do not connect a USB hub device to the front panel USB port.
Cisco ASR 9001 and Cisco ASR
