Cisco Systems ASR 9001-S manual Port 10 Gigabit Ethernet Modular Port Adapter

Chapter 3 Installing Modules and Cables in the Chassis

Modular Port Adapters

Figure 3-3shows an example of the 4-Port 10 Gigabit Ethernet modular port adapter.

Figure 3-3 4-Port 10 Gigabit Ethernet Modular Port Adapter

A9K- -

0

1

2

3

STATUS

4X10GE- MPA- A9K

330784

Table 3-2describes the 4-Port 10 Gigabit Ethernet modular port adapter LEDs.

Table 3-2	4-Port 10 Gigabit Ethernet Modular Port Adapter LEDs
LED Label		Color	State	Meaning
A/L		Off	Off	Port is not enabled.
		Green	On	Port is enabled and the link is up. The MPA A/L LED will
				blink green when there is traffic activity.
		Amber	On	Port is enabled and the link is down.
STATUS		Off	Off	Modular port adapter power is off.
		Green	On	Modular port adapter is ready and operational.
		Amber	On	Modular port adapter power is on and good, and the
				modular port adapter is being configured.

2-Port 10 Gigabit Ethernet Modular Port Adapter

The 2-Port 10 Gigabit Ethernet modular port adapter provides two cages for XFP Ethernet optical interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10-Gigabit Ethernet multimode or single mode connections.

Each XFP cage on the 2-Port 10 Gigabit Ethernet modular port adapter has an adjacent Link LED visible on the front panel. The Link LED indicates the status of the associated XFP port, as described in Table 4-4.

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

3-4