A-5
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
AppendixA Technical Specifications
RP Port Specifications.
RP Port Specifications.Power Consumption Specifications
The following table lists the power consumption specifications for a fully configured chassis.
Caution Be sure that the chassis configuration complies with the required power budgets. Failure to properly
verify the configuration may result in an unpredictable state if one of the power units fails. Contact your
local sales representative for assistance.
The following modules are supported on fixed ports on the Cisco ASR 9001 and Cisco ASR 9001-S:
•SFP-10G-ZR
•DWDM SFP10G-3033 through DWDM SFP10G-6141
•ONS-SC+-10G-C
TableA-8 RP Port Specifications
Description Value
Console port EIA/TIA-232 RJ-45 interface, 115200 Baud, 8 data, no
parity, 1 stop bit with software handshake (default)
Auxiliary port EIA/TIA-232 RJ-45 interface, 115200 Baud, 8 data, no
parity, 1 stop bit with software handshake (default)
Management ports (0, 1) Triple-speed (10M/100M/1000M) RJ-45
Sync ports (0, 1) Can be configured as one of the following:
•BITS (Building Integrated Timing System) port
•J.211 or UTI (Universal Timing Interface) port
TableA-9 Power Consumption Specifications
Description Value
Power consumption 400 W at 77°F (25°C)
425 W at 104°F (40°C)
450 W at 131°F (55°C)