Cisco Systems ASR 9001-S manual Modular Port Adapters, Port Gigabit Ethernet Modular Port Adapter

Chapter 3 Installing Modules and Cables in the Chassis

Modular Port Adapters

Figure 3-1shows the front panel of the chassis and connectors of the fixed 4x10-Gigabit Ethernet ports.

Figure 3-1	.4x10-Gigabit Ethernet SFP+ Ports
	1	2	3	4	5	6	7	68	9	332426

1	Service LAN and ToD ports	6	External USB port
2	10MHz and 1PPS indicators	7	Eight discrete LED indicators
3	SYNC (BITS/J.211) ports	8	CLUSTER ports
4	CONSOLE and AUX ports	9	Fixed SFP+ ports
5	Management LAN ports

Modular Port Adapters

The Cisco ASR 9001 Router has two bays that support the following Modular Port Adapters (MPAs):

•20-Port Gigabit Ethernet Modular Port Adapter

•4-Port 10 Gigabit Ethernet Modular Port Adapter

•2-Port 10 Gigabit Ethernet Modular Port Adapter

•2-Port 40 Gigabit Ethernet Modular Port Adapter

•1-Port 40 Gigabit Ethernet Modular Port Adapter

Note In the Cisco ASR 9001-S Router, one bay (MPA1) is disabled by default, and can be enabled by a license upgrade.

20-Port Gigabit Ethernet Modular Port Adapter

The 20-Port Gigabit Ethernet modular port adapter provides 10 double-stacked SFP (20 total) cages that support either fiber-optic or copper Gigabit Ethernet transceivers.

Each SFP cage on the Gigabit Ethernet modular port adapter has an adjacent Link LED visible on the front panel. The Link LED indicates the status of the associated SFP port, as described in Table 4-4.

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

3-2