Chapter 1 Preparing for Installation
Safety Guidelines
Figure 1-2 Front Panel of the Cisco ASR 9001-S Router
360032 |
In order to achieve the full bandwidth of 120 Gbps and to enable the disabled ports, a Cisco license can be obtained. Once the license is obtained and installed, the Cisco ASR
Cisco ASR
Note The Cisco ASR
This chapter guides you through the process of preparing for router installation.
Before installing your Cisco ASR 9001 Router, you must consider these requirements:
•power and cabling requirements must be in place at your installation site
•special equipment must be available for installing the router
•the environmental conditions that your installation site must meet to maintain normal operation
The shipping package for the router is engineered to reduce chances of product damage that may result from routine material handling during shipment:
•Keep the router in the shipping container until you have determined the installation site.
•The router should always be transported or stored in its shipping package in the upright position.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service representative immediately.
This chapter contains these installation topics:
•Safety Guidelines, page
•Site Requirement Guidelines, page
•Cisco ASR 9001 Router Port Connection Guidelines, page
Safety Guidelines
Before you perform any procedure in this publication, you must review the safety guidelines in this section to avoid injuring yourself or damaging the equipment.
Note that this section contains guidelines, and do not include every potentially hazardous situation. When you install a router, always use caution and common sense.
Cisco ASR 9001 and Cisco ASR
