Cisco Systems ASR 9001-S manual RP Front Panel Indicators, Indicator Label, Color Description

Chapter 4 Troubleshooting the Installation

Troubleshooting the Route Processor Subsystem

RP Front Panel Indicators

The RP card has eight discrete LED indicators for display of system information.

Table 4-3lists the display definitions of the eight discrete LEDs on the RP front panel as well as the normal LED states on the power modules (AC or DC) and the fan tray after a successful system startup.

	Table 4-3		RP Discrete LED Display Definitions
Indicator (Label)		LED		Color	Description
RSP FAIL		Bi-color		Red	RSP in initializing or failed state.
				Green	RSP is up and running.
				Off	RSP is normal.
LC FAIL		Bi-color		Red	LC in initializing or failed state.
				Green	LC is up and running.
				Off	LC is normal.
Critical Alarm		Single color		Red	Critical Alarm LED. A critical alarm has occurred.
(CRIT)
				Off	No critical alarm has occurred.
				(Default after reset)
Major Alarm (MAJ)		Single color		Red	Major alarm LED. A major alarm has occurred.
				Off	No major alarm has occurred.
				(Default after reset)
Minor Alarm (MIN)		Single color		Amber	Minor alarm LED. A minor alarm has occurred.
				Off	No minor alarm has occurred.
				(Default after reset)
External USB 2.0		Single color		Green	External USB is busy/active. The LED is driven by the
(EUSB)					USB controller.
				Off	External USB is not busy/active.
				(Default after reset)
Alarm Cutoff (ACO)		Single color		Off	Alarm Cutoff is not enabled.
					Note: ACO LED is not in use and will always be OFF.
Synchronization		Bi-color		Green	Sync - Time core is synchronized to an external source
(SYNC)					(either GPS or IEEE1588).
				Amber	Not used.
				Off	Time core clock synchronization is either disabled OR
				(Default after reset)	Time core is synchronized with external source
					excluding GPS and IEEE1588
Power Module
FAIL/OK		Bi-color		Green	See Figure 4-1for detailed description.
(Power Module)
				Amber	See Figure 4-1for detailed description.

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

4-10