Cisco Systems ASR 9001 manual Management LAN RJ-45 Cabling, Crossover Cable Pinout Between RP

Chapter 1 Preparing for Installation

Cisco ASR 9001 Router Port Connection Guidelines

Figure 1-24 RP Management LAN Port LED Indicators

332427

Management LAN RJ-45 Cabling

When connecting the RJ-45 port to a hub, repeater, or switch, use the straight-through cable pinout shown in Figure 1-25.

Note To comply with the intra-building lightning surge requirements of Telecordia GR-1089-CORE, Issue II, Revision 01, February 1999, you must use a shielded cable when connecting the management LAN ports on the RP card. The shielded cable is terminated by shielded connectors on both ends, with the cable shield material tied to both connectors.

Figure 1-25

MDI wiring

1TxD+

2TxD–

3RxD+

6RxD–

Straight-Through Cable Pinout to a Hub, Repeater or Switch

MDI-X wiring

1 RxD+

2 RxD–

6 TxD–	H11007
3 TxD+

When connecting to a router, use the crossover cable pinout shown in Figure 1-26.

Figure 1-26

PRP

1TxD+

2TxD–

3RxD+

6RxD–

Crossover Cable Pinout Between RP

PRP

1 TxD+

2 TxD–

3 RxD+	1
6 RxD–	7543

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

1-25