3-15
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Chapter3 Installing Modules and Cables in the Chassis
Cable Management
Installing a Cable Management Tray
To install a cable-management tray, follow these steps:
Step1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step2 Position the cable-management tray at the bottom of the chassis front panel.
Figure3-9 Cable-Management Tray Installation and Removal
Step3 Insert and tighten the captive screw(s) to secure the tray. (Figure3-9).
Step4 Connect all the cables to the intended ports and pass them through the cable management tray in an
organized manner.
Removing a Cable-Management Tray
To remove a cable-management tray, follow these steps (Figure3-9):
Step1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step2 Note the current interface cable connections to the ports on the RP.
Step3 Starting with the interface cable for the bottom port on the RP, disconnect the cable from the RP
interface.
1Cable-Management Tray
1
332147