Cisco Systems DOC-78-17916 manual Agent Requirements Solaris

Chapter 1 Preparing to Install

System Requirements

To run the Cisco Security Agent on your Solaris server systems, the requirements are as follows:

Table 1-3	Agent Requirements (Solaris)
System Component	Requirement
Processor	UltraSPARC 400 MHz or higher
	Note Uni-processor, dual processor, and quad
	processor systems are supported.
Operating Systems	Solaris 9, 64 bit, patch version 111711-11 or
	higher, and 111712-11 or higher installed.
	Solaris 8, 64 bit 12/02 Edition or higher (This
	corresponds to kernel Generic_108528-18 or
	higher.)
	Note If you have the minimal Sun Solaris 8
	installation (Core group) on the system
	to which you are installing the agent, the
	Solaris machine will be missing certain
	libraries and utilities the agent requires.
	Before you install the agent, you must
	install the "SUNWlibCx" library which
	can be found on the Solaris 8 Software
	disc (1 of 2) in the /Solaris_8/Product
	directory. Install using the pkgadd -d .
	SUNWlibCx command.
Memory	256 MB minimum
Hard Drive Space	50 MB or higher
	Note This includes program and data.
Network	Ethernet
	Note Maximum of 64 IP addresses supported
	on a system.

	Installing Management Center for Cisco Security Agents 5.2
78-17916-01		1-7