Cisco Systems DOC-78-17916 manual Attach a Rule Module to a Policy, Attach a Policy to a Group

Chapter 4 Quick Start Configuration

Configure a Policy

Attach a Rule Module to a Policy

To apply our configured email quarantine rule module to the policy we’ve created, do the following.

Step 1 From Policy edit view, click the Modify rule module associations link. This

takes you to a view containing a swap box list of available modules.

Step 2 Select the Quarantined Application Module from the list box on the left and click the Add button to move it to the right side box.

The rule module is now attached to this policy.

Attach a Policy to a Group

To apply our configured email quarantine policy to a particular group of host systems, we must attach this policy to that group.

Step 1 Move the mouse over Systems in the menu bar and select Groups from the drop-down menu that appears.

Step 2 From the group list view, click the link for the group you want to attach the policy to. This brings you to that group’s edit view.

Step 3 From the edit view, click the Modify policy associations link. This takes you to a view containing a swap box list of available policies (see Figure 4-8).

Step 4 Select the appropriate policy from the list box on the left and click the Add button to move it to the right side box.

Step 5 The policy is now attached to this group.

	Installing Management Center for Cisco Security Agents 5.2
78-17916-01		4-19