Cisco EtherSwitch Service Modules Feature Guide
How to Configure the Cisco EtherSwitch Service Module in a Switch Stack
DETAILED STEPS
Step 1 Use the show platform
Switch# show platform |
| |||
Current |
|
|
|
|
Switch# | Role | Mac Address | Priority | State |
*1 | Master | 0000.0090.3080 | 1 | Ready |
2 | Slave | 000f.8f4e.2900 | 1 | Ready |
| Stack Port Status | Neighbors | ||
Switch# | Port 1 | Port 2 | Port 1 | Port 2 |
1 | Ok | Ok | 2 | 2 |
2 | Ok | Ok | 1 | 1 |
Stack Discovery Protocol View
==============================================================
Switch | Active | Role | Current | Sequence | Dirty |
Number |
|
| State | Number | Bit |
1 | TRUE | Master | Ready | 176 | FALSE |
2 | TRUE | Slave | Ready | 177 | FALSE |
Stack State Machine View
==============================================================
Switch | Master/ | Mac Address | Version | Uptime Current |
Number | Slave |
| (maj.min) | State |
1 | Master | 0000.0090.3080 | 1.9 |
| 1344 | Ready | |
2 | Slave | 000f.8f4e.2900 | 1.9 |
| 1338 | Ready | |
Last Conflict Parameters |
|
|
|
|
| ||
Switch | Master/ | Prio | Default | Image | Uptime | Mac Address | |
Number | Slave |
| Config | Type |
|
|
|
Step 2 To display information about a stack member or the switch stack, use the following commands:
•Use the show switch command to display information related to the stack member or the switch stack.
Switch(config)# show switch 6 Current
Switch# Role Mac Address Priority State
6 Slave 0003.e31a.1e00 1 Ready
•Use the show switch neighbors user EXEC command to display detailed information about the neighbors of a switch stack:
Cisco IOS Release 12.2(25)SEC
56
