Cisco Systems OL-19025-01 manual Network Statistics, Vlan

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

Network Statistics

Table 8-2	Network Configuration Area Items (continued)
Item		Description
Voice VLAN Enabled		Indicates whether the phone allows a device attached to the PC port to access the Voice
		VLAN.
Auto Line Select		Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP for Call Control		DSCP IP classification for call control signaling.
DSCP for Configuration		DSCP IP classification for any phone configuration transfer.
DSCP for Services		DSCP IP classification for phone-based services.
Security Mode		Displays the security mode that is set for the phone.
Web Access Enabled		Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Span to PC Port		Indicates whether the phone will forward packets transmitted and received on the network
		port to the access port.
PC VLAN		VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
CDP: PC Port		Indicates whether CDP is supported on the PC port (default is enabled).
		Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA)
		is connected to the PC port. CVTA does not work without CDP interaction with the phone.
		When CDP is disabled in Cisco Unified Communications Manager, a warning is displayed,
		indicating that disabling CDP on the PC port prevents CVTA from working.
		The current PC and switch port CDP values are shown on the Settings menu.
CDP: SW Port		Indicates whether CDP is supported on the switch port (default is enabled).
		Enable CDP on the switch port for VLAN assignment for the phone, power negotiation,
		QoS management, and 802.1x security.
		Enable CDP on the switch port when the phone is connected to a Cisco switch.
		When CDP is disabled in Cisco Unified Communications Manager, a warning is presented,
		indicating that CDP should be disabled on the switch port only if the phone is connected to
		a non-Cisco switch.
		The current PC and switch port CDP values are shown on the Settings menu.

Network Statistics

The following network statistics hyperlinks on a phone’s web page provide information about network traffic on the phone. To display a network statistics area, access the web page for the phone as described in the “Accessing the Web Page for a Phone” section on page 8-2.

•Ethernet Information—Displays information about Ethernet traffic. Table 8-3describes the items in this area.

•Network—Displays information about network traffic to and from the network port (10/100 SW) on the phone. Table 8-4describes the items in this area.

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

OL-19025-01 8-7