A P P E N D I X D

Basic Phone Administration Steps

This appendix provides minimum, basic configuration steps for you to do the following:

Add a new user to Cisco Unified Communications Manager Administration

Configure a new phone for that user

Associate that user to that phone

Complete other basic end-user configuration tasks

The procedures provide one method for performing these tasks and are not the only way to perform these tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.

These procedures are designed to be used on a mature Cisco Unified Communications Manager system where calling search spaces, partitions, and other complicated configuration have already been done and are in place for existing users.

This section contains these topics:

Example User Information for these Procedures, page D-1

Adding a User to Cisco Unified Communications Manager, page D-2

Configuring the Phone, page D-4

Performing Final End User Configuration Steps, page D-8

Example User Information for these Procedures

In the procedures that follow, example are given when possible to illustrate some of the steps. Sample user and phone information used throughout these procedures includes:

User’s Name: John Doe

User ID: johndoe

Phone model: 6921

Protocol: SCCP

MAC address listed on phone: 00127F576611

Five-digit internal telephone number: 26640

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

 

OL-19025-01

D-1

 

Page 139
Image 139
Cisco Systems OL-19025-01 manual Basic Phone Administration Steps, Example User Information for these Procedures