Cisco Systems OL-19025-01 manual Figure E-3 Attaching the Phone Bracket

Appendix E Installing the Wall Mount Kit for the Cisco Unified IP Phone 6921, 6941, and 6961

Installing the Bracket

Step 2 Attach the phone bracket to the IP phone (Figure E-3).

a.Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached cords from the base of the phone.

b.Removethe label covers that are concealing the screw holes.

c.Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone’s ports should be accessible through the holes in the bracket.

d.Secure the phone bracket to the IP Phone with the machine screws.

e.Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the clips incorporated into the phone body.

Figure E-3 Attaching the Phone Bracket

Screw holes

Slot for

mounting tabs

274937

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

E-4 OL-19025-01