Cisco Systems OL-19025-01 manual Streaming Statistics

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

Streaming Statistics

Streaming Statistics

	A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A
	phone streams information when it is on a a call or running a service that sends or receives audio or data.
	The streaming statistics areas on a phone’s web page provide information about the streams. Cisco
	Unified IP Phones 6900 Series use only Stream 1.
	To display a Streaming Statistics area, access the web page for the phone as described in the “Accessing
	the Web Page for a Phone” section on page 8-2, and then click the Stream 1 hyperlink.
	Table 8-5describes the items in the Streaming Statistics areas.
Table 8-5	Streaming Statistics Area Items
Item		Description
Remote Address		IP address and UDP port of the destination of the stream.
Local Address		IP address and UPD port of the phone.
Start Time		Internal time stamp indicating when Cisco Unified Communications Manager requested
		that the phone start transmitting packets.
Stream Status		Indication of whether streaming is active or not.
Host Name		Unique, fixed name that is automatically assigned to the phone based on its MAC address.
Sender Packets		Total number of RTP data packets transmitted by the phone since starting this connection.
		The value is 0 if the connection is set to receive only mode.
Sender Octets		Total number of payload octets transmitted in RTP data packets by the phone since starting
		this connection. The value is 0 if the connection is set to receive only mode.
Sender Codec		Type of audio encoding used for the transmitted stream.
Sender Reports Sent1		Number of times the RTCP Sender Report have been sent.
Sender Report Time Sent1		Internal time stamp indication when the last RTCP Sender Report was sent.
Rcvr Lost Packets		Total number of RTP data packets that have been lost since starting receiving data on this
		connection. Defined as the number of expected packets less the number of packets actually
		received, where the number of received packets includes any that are late or duplicate. The
		value displays as 0 if the connection was set to send-only mode.
Avg Jitter		Estimate of mean deviation of the RTP data packet inter-arrival time, measured in
		milliseconds. The value displays as 0 if the connection was set to send-only mode.
Rcvr Codec		Type of audio encoding used for the received stream.
Rcvr Reports Sent1		Number of times the RTCP Receiver Reports have been sent.
Rcvr Report Time Sent1		Internal time stamp indication when a RTCP Receiver Report was sent.
Rcvr Packets		Total number of RTP data packets received by the phone since starting receiving data on
		this connection. Includes packets received from different sources if this is a multicast call.
		The value displays as 0 if the connection was set to send-only mode.
Rcvr Octets		Total number of payload octets received in RTP data packets by the device since starting
		reception on the connection. Includes packets received from different sources if this is a
		multicast call. The value displays as 0 if the connection was set to send-only mode.
Cumulative Conceal Ratio		Total number of concealment frames divided by total number of speech frames received
		from start of the voice stream.

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

OL-19025-01 8-9