Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Setup Menu

Table 4-1 Network Setup Menu Options (continued)

Option

Description

To Change

 

 

 

 

PC VLAN

Allows the phone to interoperate with 3rd party switches

1.

Make sure the Admin VLAN ID

 

that do not support a voice VLAN. The Admin VLAN ID

 

option is set.

 

option must be set before you can change this option.

2.

Scroll to the PC VLAN option,

 

 

 

 

 

 

 

press the Edit softkey, and then

 

 

 

 

enter a new PC VLAN setting.

 

 

 

3.

Press the Apply softkey, then

 

 

 

 

press Save.

 

 

 

 

SW Port Configuration

Speed and duplex of the network port. Valid values:

1.

Unlock network configuration

 

Auto Negotiate

 

options.

 

 

Scroll to the SW Port

 

100 Half—100-BaseT/half duplex

2.

 

 

Configuration option and then

 

100 Full—100-BaseT/full duplex

 

 

 

press the Edit softkey.

 

10 Half—10-BaseT/half duplex

3.

Scroll to the setting that you

 

10 Full—10-BaseT/full duplex

 

want and then press the Select

 

If the phone is connected to a switch, configure the port

 

button.

 

 

 

 

on the switch to the same speed/duplex as the phone, or

 

 

 

configure both to auto-negotiate.

 

 

 

If you change the setting of this option, you must change

 

 

 

the PC Port Configuration option to the same setting.

 

 

 

 

 

 

PC Port Configuration

Speed and duplex of the access port. Valid values:

1.

Unlock network configuration

 

Auto Negotiate

 

options.

 

 

Scroll to the PC Port

 

100 Half—100-BaseT/half duplex

2.

 

 

Configuration option and then

 

100 Full—100-BaseT/full duplex

 

 

 

press the Edit softkey.

 

10 Half—10-BaseT/half duplex

3.

Scroll to the setting that you

 

10 Full—10-BaseT/full duplex

 

want and then press the Select

 

If the phone is connected to a switch, configure the port

 

button.

 

 

 

 

on the switch to the same speed/duplex as the phone, or

 

 

 

configure both to auto-negotiate.

 

 

 

If you change the setting of this option, you must change

 

 

 

the SW Port Configuration option to the same setting.

 

 

 

 

 

 

 

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

 

OL-19025-01

4-5

 

 

 

Page 63
Image 63
Cisco Systems OL-19025-01 manual PC Vlan