Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

Table 7-2

Status Messages on the Cisco Unified IP Phone 6900 Series (continued)

 

 

 

 

Message

 

Description

Possible Explanation and Action

 

 

 

Load rejected HC

The application that was downloaded is

Occurs if you were attempting to install a version of

 

 

not compatible with the phone’s

software on this phone that did not support hardware

 

 

hardware.

changes on this newer phone.

 

 

 

Check the load ID assigned to the phone (from Cisco

 

 

 

Unified Communications Manager, choose Device >

 

 

 

Phone). Re-enter the load displayed on the phone.

 

 

 

No default router

DHCP or static configuration did not

If the phone has a static IP address, verify that the

 

 

specify a default router.

default router has been configured. See the

 

 

 

“Network Setup Menu” section on page 4-4

 

 

 

section for details.

 

 

 

If you are using DHCP, the DHCP server has not

 

 

 

provided a default router. Check the DHCP

 

 

 

server configuration.

 

 

 

No DNS server IP

A name was specified but DHCP or static

If the phone has a static IP address, verify that the

 

 

IP configuration did not specify a DNS

DNS server has been configured. See the

 

 

server address.

“Network Setup Menu” section on page 4-4

 

 

 

section for details.

 

 

 

If you are using DHCP, the DHCP server has not

 

 

 

provided a DNS server. Check the DHCP server

 

 

 

configuration.

 

 

 

TFTP access error

TFTP server is pointing to a directory

If you are using DHCP, verify that the DHCP

 

 

that does not exist.

server is pointing to the correct TFTP server.

 

 

 

If you are using static IP addresses, check

 

 

 

configuration of TFTP server. See the “Network

 

 

 

Setup Menu” section on page 4-4for details on

 

 

 

assigning a TFTP server.

 

 

 

TFTP file not found

The requested load file (.bin) was not

Check the load ID assigned to the phone (from Cisco

 

 

found in the TFTPPath directory.

Unified Communications Manager, choose Device >

 

 

 

Phone). Verify that the TFTPPath directory contains

 

 

 

a .bin file with this load ID as the name.

 

 

 

 

TFTP error

 

The phone does not recognize an error

Contact the Cisco TAC.

 

 

code provided by the TFTP server.

 

 

 

 

 

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

 

OL-19025-01

7-5

 

 

 

Page 99
Image 99
Cisco Systems OL-19025-01 manual Setup Menu section on page 4-4for details on