CONNECTING TO A NETWORK
If you have access to a network, you can connect to your network by creating a dial-up connection using a RAS account. Before you can create this dial-up connection, your network administrator needs to set up a RAS account for you.
To create a dial-up connection to a network:
If your device does not have a built-in modem, install a modem card.
Get the following information from your network administrator: corporate dial-up access telephone number, user name, password, domain name, and TCP/IP settings.
Select StartàProgramsàCommunicationàConnections.
Double-tap the Make New Connection icon.
Enter a name for the connection, such as "Corporate Dial-Up."
Select Dial-Up Connection, then select Next.
Select your modem type. You should not need to change settings in the Configure or TCP/IP Settings dialog boxes. When finished, select Next.
Enter the access phone number and select Finish.
Once you have created the dial-up connection, double-tap the connection, enter your user name, password, and domain, and select Connect any time you want to connect. Once connected, you can use Inbox to send and receive e-mail. Before you can use Inbox, you need to provide the information it needs to communicate with the mail server. For specific instructions, see Inbox.
