INSERTING A COMPACTFLASH CARD

To insert a CompactFlash card, follow these steps:

Remove the CompactFlash slot cover Ê. Turn over the device. On the back of the device, there is an indentation that allows you to pull the cover out of the slot with a thumbnail.

NOTE: The CompactFlash slot cover Ê can and should be replaced only when the slot is empty.

Ê

Removing the CompactFlash slot cover

The front side of a CompactFlash card is usually identified with a label Ë. Position the card so that the label side of the card is closest to the screen of the device and insert the pin-hole edge of the card into the slot. Carefully press the card into the slot until you feel it dock with the connector inside the slot.

CAUTION: Forcing a CompactFlash card into the CompactFlash slot can damage the slot.

Ë

Inserting a CompactFlash card

Page 125
Image 125
Compaq 2100 manual Inserting a Compactflash Card, Removing the CompactFlash slot cover, Inserting a CompactFlash card