![](/images/new-backgrounds/1156356/156356115x1.webp)
Use the tip of the stylus to press the reset button Ê.
The device automatically restarts.
Performing a Full Reset
A full reset restarts your device and removes all information stored in RAM memory such as data files and system settings. Perform a full reset if a normal reset does not solve the system lockup or failure.
NOTE: If you have saved your data using one of the backup procedures, it is possible to restore your saved data after performing a full reset.
To perform a full reset:
Disconnect the device from the AC Adapter, if using external power.
Turn over the device.
Remove both the main battery and the backup battery.
Wait at least 1 minute, then replace the batteries.
Turn over the device, then press the power button to restart the device.
Run through the Setup Wizard again to reestablish your system and calibration settings.