
User attendance messages (Continued)
Message | Action |
|
|
Prog Engine Code | The printer is is being programmed with a new engine code. Wait for the |
DO NOT POWER OFF | message to clear and the printer to reset. |
| Warning: Do not turn the printer off while this message is displayed. |
|
|
Program Flash | The printer is storing resources, such as fonts or macros, in flash memory. |
DO NOT POWER OFF | Wait for the message to clear. |
| Warning: Do not turn the printer off while this message is displayed. |
|
|
Prog System Code | The printer is programming new system code. Wait for the message to |
DO NOT POWER OFF | clear and the printer to reset. |
| Warning: Do not turn the printer off while this message is displayed. |
|
|
Ready | Send a job to print. |
|
|
Remove Paper Standard Bin | The standard output bin is full. |
|
|
Resetting Maint Cnt Valu | The printer is resetting the counter that tracks wear on the fuser. |
|
|
Resetting PC Cnt Value | The printer is resetting the counter that tracks wear on the photoconductor. |
|
|
Resetting the Printer | Wait for the message to clear. |
|
|
Res Reduced | The printer is reducing the resolution of a page in the current job from 600 |
| dots per inch (dpi) to 300 dpi to prevent a 38 Memory Full error. Res |
| Reduced remains on the display while the job prints. |
|
|
Restoring Factory Defaults | Wait for the message to clear. |
| Note: When factory default settings are restored: |
| • All downloaded resources (fonts, macros, symbol sets) in the |
| printer memory are deleted. |
| • All menu settings return to the factory default except: |
| – The Display Language setting in the Setup Menu |
| – All settings in the Parallel Menu, Network Menu, and |
| USB Menu |
Std Bin Full | The standard bin is full. | |
|
| |
Toner Low | • Replace the toner cartridge. | |
| • Press | to clear the message and continue printing. |
|
| |
Tray <x> Missing | Insert the tray into the printer. | |
|
| |
USM | The printer is processing data through the specified USB port. | |
|
| |
Waiting | The printer has received a page of data to print, but is waiting for an End of | |
| Job command, a Form Feed command, or additional data. |
•Press to print the contents of the buffer.
•Cancel the current job.