3. Diagnostic aids
Accessing service menus
There are two different test menus that can be accessed during POR to identify problems with the printer.
Configuration Menu | 1. Turn off the printer. |
| The Configuration menu group contains a set |
| 2. Press and hold | and . | of menus, settings, and operations which are |
| 3. Turn on the printer. |
| infrequently required by a user. Generally, the |
|
| options made available in this menu group are | |
| 4. Release the buttons when Performing Self | ||
| used to configure a printer for operation. | ||
| Test displays. |
| |
|
| See “Available menus” on page | |
| 5. The message CONFIG MENU displays on the | ||
| top line of the operator panel. |
| |
Diagnostics Mode | 1. Turn off the printer. |
| The Diagnostic menu group contains the |
| 2. Press and hold | and . | settings and operations used while |
| 3. Turn on the printer. |
| manufacturing and servicing the printer. |
|
| See “Menus may vary depending on the | |
| 4. Release the buttons when Performing Self | ||
| Test displays. |
| features and options of the printer.” on |
|
|
| page |
Printing menus
To print a listing of the states and settings of the printer:
1.At the Ready prompt, press under Menu until Utilities appears.
2.Press .
3.Press until Print Menus appears.
4.Press .
Diagnostic aids