66 Troubleshooting
Volume (xx:yy:zzz) is
currently in state
“STATE”
Lists the current state of the specified virtual disk
when it is not optimal. The state may include:
• INACTIVE: The virtual disk is inactive, possibly
foreign, or could be in any one of the states
mentioned below.
• DEGRADED: The virtual disk is in a degraded state
and has lost redundancy.
• RESYNCING: The virtual disk is degraded and
currently rebuilding.
• FAILED: The virtual disk has an error and is in a
failed state.
• MISSING: The virtual disk is no longer present
though a record of it remains.
• UNKNOWN: The virtual disk has an error that is
not defined by the previous errors.
Device not available
at HBA n,HDL n, LUN
Device may not be ready at this time. The device will
be retried. If the problem persists, restart your
system.
ERROR! Device is not
responding to Read
Capacity
The device did not respond to a read capacity
command. Contact Dell.
Please wait, spinning
up the boot device!
The boot device was inactive, and is now spinning
up.
Devices in the
process of spinning
up
One or more devices were inactive and are now
spinning up.
nn drives are
reported, BIOS memory
allocation is full!
The reported drives consumed all of the available
memory, no more memory can be allocated.
Failed to add device,
too many devices!
Could not allocate resources for additional devices.
Table 7-4. BIOS Error Messages (continued)
Message Meaning
PERC H200.book Page 66 Tuesday, July 13, 2010 4:15 PM