Figure 4-3. Connecting the Cable for 6Gbps SAS HBA
1
2
1 6Gbps SAS HBA | 2 | Cable from the external enclosure |
10Replace the cover of the system. See your system’s Hardware Owner’s Manual or the User’s Guide for more information on closing the system.
11Reconnect the power cable(s) and network cables, and then turn on the system.
NOTE: Ensure that you do not connect a hard disk and tape drive to the same PERC H200 card.
NOTE: For information on connecting your PERC H200 card to a tape drive, see your system’s Hardware Owner’s Manual on the Dell Support website at support.dell.com/manuals.
NOTE: Installing an operating system on a disk attached to the 6Gbps SAS HBA or a tape drive is not supported.
28
