Dell H200 Updating the Windows Driver, Follow the step below according to your operating system

Updating the Windows Driver

Perform the following steps to update the Windows driver for the PERC H200 card that is already installed on your system:

NOTE: It is important that you close all applications on your system before you update the driver.

1Follow the step below according to your operating system.

•For Windows Server 2003:

Click Start→Settings→Control Panel→System.

•For Windows Server 2008:

Click Start→Settings→Control Panel→System.

•For Windows Server 2008 R2:

Click Start →Control Panel→System and Security→System

•The System Properties screen is displayed.

2For Windows Server 2003,click on the Hardware tab. For Windows Server 2008 and Windows Server 2008 R2, go to step 3.

3Click Device Manager.

The Device Manager screen is displayed.

NOTE: An alternative method is to open Device Manager. In Windows Explorer, right-click on My Computer and select Manage. The Computer Management screen is displayed. Select Device Manager in the left panel.

4Double-click on SCSI and RAID Controllers.

NOTE: In Windows 2008, SAS is listed under Storage Controllers.

5Double-click the RAID controller for which you want to update the driver.

6Click the Driver tab and click Update Driver.

The Upgrade Device Driver Wizard screen is displayed.

7Make the driver files available with the USB key, or other media.

8Select Install from a list or specific location.

9Click Next.

36

Driver Installation