Dell manual Connecting the Cable for Perc H200

7Tighten the bracket screw, if any, or use the system’s retention clips to secure the controller to the system’s chassis.

8For a PERC H200 card, connect the cables from the end devices or the backplane of the system to the controller. See Figure 4-2.

Figure 4-2. Connecting the Cable for PERC H200

1

3

2

1 SAS x4 internal connector 2 cable

3PERC H200 Card

9For the 6Gbps SAS HBA controller, connect the cable from the external enclosure to the adapter. See Figure 4-3.

NOTE: The external cable can be connected to either of the two external connectors.

Hardware Installation

27