5Loosen the captive
6Disconnect the display cable, using the
7Dislodge the display cable from the display cable channel.
1 | 2 | 3 | 4 |
5
| 8 |
|
|
|
|
|
| 7 |
|
|
|
|
|
| 6 |
|
|
1 | screws (2) | 2 | display cable | 3 | display cable |
4 | captive grounding- | 5 | antenna cables (2) | 6 | standby switch |
| wire screw |
|
|
|
|
7 | display cable | 8 | display cable channel |
|
|
| connector on system |
|
|
|
|
| board |
|
|
|
|
8Lift the display away from the computer.
NOTICE: The standby switch is fragile and easily broken. Avoid knocking the switch when removing and replacing the display.