Dell Vostro 1000 owner manual Removing an ExpressCard or Blank, Release latch

Models: Vostro 1000

1 210
Download 210 pages 12.73 Kb
Page 71
Image 71

The computer recognizes the ExpressCard and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the ExpressCard.

Removing an ExpressCard or Blank

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: Use the ExpressCard configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.

Press the release latch and remove the card or blank. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the card out.

Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from dust and other particles.

2

1

1 release latch

2

ExpressCard

Using Cards

71

Page 71
Image 71
Dell Vostro 1000 owner manual Removing an ExpressCard or Blank, Release latch