bRelease the Mini-Card by pushing the metal securing tabs toward the back of the computer until the card pops up slightly.

cLift the Mini-Card out of its system board connector.

1

2

3

1

metal securing tab

2

Mini-Card

3

metal securing tab

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.

5Install the replacement Mini-Card:

a Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then press the other end of the Mini-Card down into the securing tabs until the card clicks into place.

104

Adding and Replacing Parts

Page 104
Image 104
Dell Vostro 1000 owner manual Metal securing tab Mini-Card