EverFocus EKR-KB1 Sensormatic / American Dynamics Dome, Reference material and documents

6.16 Sensormatic / American Dynamics Dome

6.16.1 Reference material and documents

Dome Sensormatic DeltaDome II

Rs-422/RS-485 Communication Protocols, 8000-2694-01, Rev.A

6.16.2 Connection

6.16.2.1 Cable

White	RS485A	RX +
Yellow	RS485B	RX -

6.16.2.2 Dome settings

Dome ID-number must be set according to the respective installation manual.

6.16.2.3 Keyboard settings

During Keyboard setup, submenu  must be suitably set:









Baudrate is fixed (4800 baud).

6.16.3 Setup

Dome setup is mostly carried out by On Screen Menu.

Some parameters can be set up by pressing a combination of keys or by inserting a special code.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

6.16.3.1 OSM Setup

Connect the dome directly to the keyboard and a monitor to the dome video outlet. The EKR-KB1 keyboard enter in special mode during the dome setup.

start dome setup

The dome show the On Screen Menu; the keyboard shows the change mode in the display:







setup end

Joystick : cursor movement within the menus

or/ : select the submenus

orto increase a value; cursor to the right in text definitions

Page 99 MNNCEKRKB1_0439