EverFocus EKR-KB1 operating instructions Pelco Dome, Reference material and documents

6.13 Pelco Dome

6.13.1 Reference material and documents

Dome Spectra II 3.31

Pelco Protocol Manual, “D” Protocol, March 2, 1999

6.13.2 Connection

6.13.2.1 Cable

White RS485A RX+

Yellow RS485B RX-

6.13.2.2 Dome settings

Dome ID-number must be set according to the respective installation manual.

Protocol must be set as Type ‘D’.

6.13.2.3 Keyboard settings

During Keyboard setup, submenu  must be suitably set:









Baudrate is fixed (2400 baud).

6.13.3 Setup

The dome can be set up by pressing a combination of keys or by inserting a special code.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

6.13.4 Preset, scan, home

(1÷32): store the present position as preset position number X

(1÷32): erase previously stored preset position number X

(1÷32): movement towards previously stored position X

: movement towards the Home position, corresponding to preset position 1

: movement towards pan position 0

Page 91 MNNCEKRKB1_0439