EverFocus EKR-KB1 Elbex Dome, Reference material and documents, Dome setup, Dome settings

6.5 Elbex Dome

6.5.1 Reference material and documents

Dome Elbex EX8389

EMB Camera (R0.70), Camera ID Code Manual for Digital Camera Control

ECCCamera (R0.70), Command Manual for Digital Camera Control, Dec. 18, 2002

6.5.2 Notes on protocol

Elbex protocol was designed to control a range of domes, whose features are dissimilar. It is possible that each command here described is used either in the whole dome range or is peculiar of a single model.

Please read the dome manual to get the whole list of available functions. Access level is fixed to 3 (complete control).

6.5.3 Connection

6.5.3.1 Cable

Elbex EX8389

White RS485A RS422+

Yellow RS485B RS422-

6.5.3.2 Dome settings

Dome ID-number must be set according to the respective installation manual. It is not possible to change remotely the ID-number.

6.5.3.3 Keyboard settings

During Keyboard setup, submenu , must be suitably set:









Baudrate is fixed.

6.5.4 Dome setup

The dome can be set up by pressing a combination of keys or by inserting a special code.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

6.5.5 Note on dome control

The protocol used by Elbex domes is particularly time-demanding and it is not possible to control more than one dome on a communication line at a given time. The ideal configuration has a single control keyboard and a number of domes on each communication line.

Page 64 MNNCEKRKB1_0439