EverFocus EKR-KB1 Eneo Pan & Tilt, Configuring the pan & tilt, Configuring the keyboard

6.8 Eneo Pan & Tilt

6.8.1 Materials and reference documents

Eneo Pan & Tilt VPT-42/RS1.

Protocol documents PC COMMAND-v3.0VT e VT-ASCII.

6.8.2 Connections

6.8.2.1 Cable

Eneo VPT-42/RS1

		RS485 RX+/
White	RS485A	TTY 20 mA
Yellow	RS485B	RS485 RX-/
		TTY 20 mA

6.8.2.2 Configuring the pan & tilt

The number of the pan & tilt must be configured correctly. See the corresponding manual.

6.8.2.3 Configuring the keyboard

When configuring the keyboard, the  submenu should be set up as follows:









The baud rate should correspond to the one selected for the pan & tilt.

6.8.3 Configuring the pan & tilt

Settings for all pan & tilt parameters requiring configuration are made by pressing a combination of keys or byinserting a special code.

For all pan & tilt setup operations the keyboard should be enabled for TELEMETRY SETUP (menu ).

The menu for pan & tilt setup is entered by pressing :













The items in the setup menu are described below.

Individual settings can be recalled one at a time using combinations of dedicated keys:

autopan setup

standard patrol setup

random patrol setup

home position setup

preset speed setup.

Page 75 MNNCEKRKB1_0439