EverFocus EKR-KB1 operating instructions Star Dome, Autopan, patrol, tour

6.17 Star Dome

6.17.1 Reference material and documents

Dome Star SMD

MD200 Series Control Command Reference, rev.2.02, September 1, 1999

6.17.2 Connection

6.17.2.1 Cable

White	RS485A	Data +
Yellow	RS485B	Data -

6.17.2.2 Dome settings

Dome ID-number must be set according to the respective installation manual.

6.17.2.3 Keyboard settings

During Keyboard setup, submenu must be suitably set:









Baudrate is fixed (9600 baud).

6.17.3 Preset, scan, home

(0÷63): store the present position as preset position number X

(0÷63): erase preset position number X

(0÷63): movement towards previously stored position X

: movement towards the Home position

6.17.4 Autopan, patrol, tour

For the Star dome, the autopan and patrol functions are called swing and group respectively. In addition, autopan can be of the horizontal type (Pan Swing) or vertical (Tilt Swing).

Swing is a movement between the horizontal or vertical limits of two preset positions. Group is a continuous movement between as series of preset positions.

Tour is used to join different groups into a single sequence of positions.

Page 102 MNNCEKRKB1_0439