5.2.2 Selecting the previous/next camera
The and keys select, respectively, the previous and next cameras as set up in the automatic
sequence preset at the video device level. If the automatic sequence is in progress, the first time the and
keys are pressed, it will be halted.
The and keys can be disabled and are managed the most recent versions of the video devices
devices (Eneo matrix
If the keys are pressed for the other video devices, they will be ignored.
5.2.3 Everfocus DVR Control
5.2.3.1 DVR Mode
When the keyboard is set to control an Everfocus DVR a special screen is proposed:
reads the active DVR number.
DVR mode switches keys behaviour and the new meaning is read in light color close to each key. Please read the DVR manual to understand each key use.
When the keyboard is in DVR mode it can completely control the DVR and cannot control telemetry receivers or domes.
To switch to and fro DVR mode and Telemetry mode push [DVR MODE].
DVR Mode procedures
Select the active DVR:
•push [DEVICE]
•insert DVR number (0 to 16382)
•confirm with [MODE].
Video channel request:
•push [CH]
•insert the requested video channel
•when necessary confirm with [MODE].
Jog and shuttle
Jog and Shuttle corresponds to the DVR knob movements.
Jog control is obtained by means of [JOG<] and [JOG>]: each push is equivalent to one jog kick.
Rotate the joystick clockwise and counterclockwise to control shuttle.
Joystick, being mostly used to move cursors in configuration menus, can also be used for quick selection of up to 4 video channels:
•joystick left: channel 1
•joystick right: channel 2
•joystick up: channel 3
•joystick down: channel 4.
Page 26 | MNNCEKRKB1_0439 |
