EverFocus EKR-KB1 operating instructions Return position, Other special codes

, remove position 5

, 5 seconds dwell time between one position and the next , start the patrol sequence.

6.9.6 Auxiliary relays

(1÷8): activate relay X

(1÷8): deactivate relay X.

6.9.7 Lenses

: autofocus on

: autoiris on

6.9.8 Return position

It is possible to configure the dome to move automatically to a “return position” after a set interval of inactivity. , where X consists of:

•the first two digits show the return position to be considered (only positions from 1 to 99 are allowed; positions from 100 to 128 can not be selected)

•the third digit shows the return time:

0: 10 seconds,		1: 20 seconds,		2: 30 seconds,
3: 40 seconds,		4:	1 minute,	5:	2 minutes,
6:	5 minutes,	7:	10 minutes,	8:	20 minutes,
9:	40 minutes

For example, the code sets the dome to return to position 21 after 5 minutes of inactivity.

6.9.9 Other special codes

: text shown/not shown (toggle)

: Backlight compensation on/off (toggle)

: reset internal memory of dome

Page 80 MNNCEKRKB1_0439