EverFocus EKR-KB1 Opening a nd checking the package, Contents of the package, Opening the package

1 Opening a nd checking the package

The following procedures should be carried out before connecting to the power supply, unless indicated otherwise.

Installation should only carried out by skilled technical personnel.

1.1 Contents of the package

When the product is delivered, make sure the package is intact and has no obvious signs of dropping scrapes or scratches. If the package is damaged contact the supplier immediately.

•1 EKR-KB1 keyboard

•1 external power supply

•6 telephone cables 6/6 point-to-point, length 150 cm approx.

•6 RJjack shunt boxes

•this user’s manual

Make sure the contents correspond to the materials listed above.

1.2 Opening the package

If the package has no obvious defect due to dropping or abnormal scrapes and scratches, check the materials it contains with the list supplied in the previous paragraph.

The technician will be responsible for disposing of the packaging material by recycling or, in any case, according to the current legislation in the country of use.

1.3 Checking the markings

Before proceeding with the installation, check the marking labels to make sure the supplied material corresponds to the required specifications as described in the next paragraph. Never, under any circumstances make any changes or connections that are not described in this manual: the use of inappropriate equipment may be very dangerous for the safety of personnel and the system itself.

1.4 Marking Data

A label, conformed to CE markings, is placed on the lower side of the EKR-KB1 keyboard. It contains the identification code of the model (Barcode EXT3/9).and indicates the serial number of the model (Barcode EXT3/9).

When you are ready to install, check if the characteristics of the keyboard’s power supply correspond to the requested ones. The use of unsuitable equipment can be cause of safety hazards to personnel and to the system itself.

Page 7 MNNCEKRKB1_0439