EverFocus EKR-KB1 operating instructions OSM Setup, Direct setup

6.6.3.1 OSM Setup

Connect the dome directly to the keyboard and connect a monitor to the dome video outlet.

The EKR-KB1 keyboard enters special mode while the dome is being set up. When is pressed for the first time, the keyboard is reset to normal operation.

starts dome setup.

The dome shows the menu on video; the keyboard shows the mode change on the display:







end setup enter submenu

Joystick : shifts the cursor within the menus

Joystick : changes the value shown by the cursor.

When dome movement is required in OSM mode, the key should be held down while the joystick is being

moved .

Activation of Zoom Tele and Zoom Wide, when required, is obtained by rotating the joystick .

6.6.3.2 Direct setup

Some parameters can be set up by pressing the keys or inserting a special code:

Line lock phase: increase, decrease.

Automatic autoflip: enable, disable

Zoom speed: (1÷4); slow zoom (X = 1), fast zoom (X = 4)

Pan speed proportional to thezoom: enabled, disabled

Digital zoom: disabledd, (2÷8) enabled 2x÷8x

Focus speed: (1÷4); focus slow (X = 1), focus fast (X = 4)

Autofocus: on/off (toggle), off

Autoiris : on

Page 71 MNNCEKRKB1_0439