6.18.6 Camera set up

The dome allows the enabling of IR mode and automatic autoflip; These parameters are setup at the same time. Only some VCL models allow the one-colour changeover. In case of infrared illumination, the IR mode is suggested. The autoflip, when enabled, consists of a 180° dome rotation when the limit switch is joined towards the low.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

: IR mode disabled, autoflip disabled

: IR mode enabled, autoflip disabled

: IR mode disabled, autoflip enabled

: IR mode enabled, autoflip enabled.

6.18.7 Lenses

Autofocus: on, off

Autoiris: on, off

Change mono/colour: on/off (toggle), automatic

6.18.8Other functions

autoflip

Alarm mode: on, off

Relay: on, off

washer on

wiper on

Page 108

MNNCEKRKB1_0439

Page 110
Image 110
EverFocus EKR-KB1 operating instructions Camera set up, Lenses