EverFocus EKR-KB1 operating instructions Samsung Dome, Reference material and documents

6.14 Samsung Dome

6.14.1 Reference material and documents

Dome Samsung SCC-641

Dome Samsung SCC-643P

Samsung Protocol

6.14.2 Connection

6.14.2.1 Cable

	SCC-641
White	RS485A	Txd +
Yellow	RS485B	Txd -
	SCC-643
White	RS485A	Rxd +
Yellow	RS485B	Rxd –

6.14.2.2 Dome settings

Dome ID-number must be set according to the respective installation manual.

Baudrate can be selected among the following values: 4800, 9600 (default), 19200, 38400 baud.

For the Dome SCC-643 configure the mode FULL DUPLEX. Should the system require it, there can be configured the mode HALF DUPLEX: in this case the connection is the same as for the Dome SCC-641, on the poles Txd+ and Txd-.

6.14.2.3 Keyboard settings

During Keyboard setup, submenu , must be suitably set:









Baudrate must be equal to the one selected for the dome.

6.14.3 Setup

Dome setup is mostly carried out by On Screen Menu.

Some parameters can be set up by pressing a combination of keys or by inserting a special code.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

Page 94 MNNCEKRKB1_0439